Two sets of buildings plans for residential one and two family uses.
Three sets of plans for Commercial and Industrial uses.
Two sets of site plans for residential one and two family projects.
For Commercial and Industrial projects please refer to the site development process for the minimum site plan submission requirements.
Click here for a printable version of the building permit submission requirements
Building Plan Information
Please use the following checklist to provide detailed building plans of the entire project. Plans shall be of adequate size and scale allowing for satisfactory review. Commercial and industrial projects shall require a minimum drawing scale of 1/4 inch. Permits may be issued only when sufficient information is given to show that the proposed work will comply with all building and zoning laws. All work performed will be subject to field inspections.
Complete scope of work - if work is to be completed in phases, please clearly indicate phases and time frame for completion.
Complete floor plan with room labels and dimensions - for interior alterations and additions, please show both the existing and proposed floor plans.
Front, side, and rear elevation views showing final grade and roof pitch
Foundation plan - please include an overview plan of foundation or footings to include footer size, type of foundation wall, pier locations and size, girder system size, spans, and foundation vent locations. Please specify if the crawlspace is to be conditioned or vented.
Type of floor system, engineered trusses, I-joist, conventional framed, etc. to include all specifications, size, spacing, and spans
Type of roof system, engineered trusses, conventional frame, etc. to include all specifications, size, spacing, and spans - if trusses are utilized, plans must be on site at time of framing inspection.
A detailed wall section from the footing to the roofing material
Separate electrical, mechanical, and plumbing plans may be required.
Site Plan Information
Please use the following checklist to provide a detailed site plan of the entire property. Plans shall be of adequate size and scale allowing for satisfactory review. Permits may be issued only when sufficient information is given to show that the proposed work will comply with all building and zoning laws.
All property lines and adjacent streets and alleys
All right-of-ways and easements
All setback lines
All existing structures
All proposed structures to include building footprints, decks, porches, patios, stoops, bay windows, window wells, chimneys, mechanical equipment, stairs, sidewalks, retaining walls, fences, and ornamental features
Driveways and all parking areas
All structure sizes and measurements - please show distance from structures to property lines and distances between all structures.
An illustration of lot coverage showing percentage of all impervious area